Using cooled semen in a breeding program is becoming a much more viable option for many horse producers. It does involve more coordination and organization between mare owner, stallion manager and veternarian. However, it is a fairly simple method to reduce the costs, yet breed to more superior stallions. If procedures are correct, and mares are managed properly, success rates should be the same as if bred in a traditional artificial insemination program.

Basic Program: Stud Farm to the Mare

Once the mare owner has determined a shipment of semen is needed, the stallion manager oversees the processing of the semen. It is critical the stallion be collected, semen processed, and placed in the cooling container within 15 minutes of collection. Unextended semen, maintained at it's collection temperature (99 F) for over 15 minutes results in markedly reduced sperm motility at 24 hours. Therefore, the semen must be collected, filtered, analyzed for volume, motility, and concentraion, mixed with extender, and placed in the shipping container within 15 minutes. Use of an extender with semen processed for storage and transport is critical to its survivability. Extender provides nutrients to the sperm cells and contains antibiotics to destroy harmful bacteria. Because of reduced viability, mares should be inseminated with 1 to 2 billion sperm cless and a volume of not more than 40ml of semen. If a stallion has a sufficient concentration, the ejaculate may be split and several shipments obtained from a single collection. Additionally, if there are mares to be bred on-the-farm, collections with sufficient concentrations may be split for on-the-farm use and shipment.

Careful evaluation and calculations must be done to ensure proper concentration of the packaged semen. Recent research recommends semen to be packaged with no more than 20 to 25 percent seminal plasma. A dilution of 1:3 (semen to extender) results in 25% seminal plasma and 20% seminal plasma is obtained through 1:4 dilution. Additionally, there should be a minimum of 25 x (10 to the sixth power) motile cells/ml but not more than 75 X (10 to the sixth power)motile cells/ml. (motile cells/ml = % motility X concentration cells/ml). The most accurate evaluation and semen packaging is done if the stallion manager evaluates concentration of each ejaculate prior to processing. If not, the ejaculate should be extended using the above guidelines. If the concentration of the ejaculate is very low, the sample may need to be centrifuged to obtain the minimum concentration.

Once packaged, the container is sent via commercial carrier. The most common routes are an overnight mail service (UPS, Federal Express). Arrangements can be made with these companies for door-to-door service. Most commercial airlines will accept the shipping containers as unaccompanied baggage on a designated flight. However, containers must be taken to, and picked-up from the airport. Because most overnight services do not operate on weekends, commercial airlines are a viable option.

Once the container is received at the location of the mare, it should be kept in a safe place, and DO NOT OPEN until ready to inseminate the mare! Anyone skilled in equine artificial insemination has the techniques to inseminate with cooled semen. The mare should be prepared for insemination, semen removed from the container, swirled to mix, drawn into a slightly warm syringe, and inseminated as soon as possible. The semen need not be warmed prior to being placed intothe mare as she provides the most desirable environment and best warmer for the semen. Following insemination, motility of the semen must be evaluated. A drop of semen should be placed on a warm slide (99 F) and examined under a microscope for forward motility. The shipping container must then be returned to the stallion farm for future use.

Potential Problems

Success of a cooled, transported semen program requires careful attention to detail and much coordination between the mare owner, stallion manager, and veternarian. The purpose of a transported semen program is to preserve the fertilizing ability of sperm for a prolonged period of time. Cooling and storage will not improve semen quality.

The most common pitfall in failure to obtain pregnancy through cooled semen is associated with the mare's reproductive cycle. Various aspect such as failure to recognize her heat cycle, or missing her expected ovulation by more than 24 hours will oftern result in an open mare. Owners should realize more than one semen shipment may be required. One study reported overall conception rate of 91 percent over three heat cycles (n=55). However, the first-cycle conception rate was only 65 percent with an average of 1.7 inseminations per cycle and an average of 1.8 cycles per conception.

Correct handling of semen is of utmost importance. The effects of subtle errors in semen handling are magnified when semen is stored, rather than used immediately following collection. There is the potential of damage to the spermatozoa during the collection, processing and shipment. Semen must be handled from collection to insemination in such a manner as to not shock or damage the sperm. If collection or storage devices are contaminated by bacteria, chemicals, or even soap residue, the survivability of the sperm cells can be severely diminished. Proper temperature control of semen prior to cooling and prior to insemination is crucial. For example, if semen is initially mixed with extender which is too cool or too warm, damage will occur. Furthermore, the stallion manager must be conscientious enough to follow the correct packaging and cooling instructions.

Breed Association Restrictions

Breed association restrictions are continually changing. Horse breeders interested in pursuing use of cooled semen should contact their breed association for the most current guidelines.